Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for an Electric Commuter Bike from KBO Bike


2002 Vulcan Carrera - sizes please
#1
Just about to replace the bottom bracket on a standard 2002 Vulcan Carrera - all components seem to be Shimano. Does anyone know what size bottom bracket I need, and what fitting removal tool / crank pull I will need...


Thanks
  Reply
#2
i changed my bottom bracket a few weeks ago,the best way i found to get the size was to take it out and measure it,i also upgraded from a semi sealed to a cartridge bb.i actually used a hammer to remove my cranks rather than a puller but i wouldnt recommend that as my cranks and chainrings were being replaced as well. i used the tool in this link to actually remove the bottom bracket along with a 2 foot breaker bar and a blow torch (some idiot in the factory had glued it in place)
ride until your wheels fall off
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump: