Torque specifications Pazzaz Alloy Quill to A-Head Adaptor

28average · 05-22-2011, 12:21 PM

Need a reliable source for installation of Pazzaz Alloy Quill to A-Head Adaptor. Is this item familiar and were specific torque specification range(s) determined for this particular part? I see that ControlTech and Shimano are listed here on the "bicycletutor" site.

Painkiller · 05-22-2011, 06:46 PM

174-260 inch pounds same as any stem or gooseneck. park tool sight will be helpful to you check it out.

28average · 05-22-2011, 09:16 PM

(05-22-2011, 06:46 PM)painkiller Wrote: 174-260 inch pounds same as any stem or gooseneck. park tool sight will be helpful to you check it out.

Aware of info at Park Tool before posting the thread. Apprx. 10 Nm is no small difference (174-260 in.lbs), maybe it is. Thanx

10 Latest Posts
Hatch Chiles Rule! Yesterday 06:18 PM
Are you mainly into Mountain Biking, Roa... 11-11-2026 11:08 AM
Are 26" really dying out? 11-11-2026 11:02 AM
Wanted \| Magura Louse or Julie rear 11-11-2026 04:03 AM
Should eBikers have to get an eBike lice... 11-09-2026 05:21 AM
How Bad Are E-bikes By You? 11-08-2026 10:29 PM
Shortness of breath. 11-08-2026 09:56 PM
Hello All 11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does... 11-06-2026 02:48 AM
Chain skips under heavy load when pedall... 11-06-2026 02:44 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom