Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the November Giveaway for the Fiido D11 folding sport e-bike


Seat adjustment
#1
During my rides I find myself scooting back often into the comfort zone of my seat. Is my seat too far forward or backwards or what? Hight adjustment is good as my knees are only slightly bent at the bottom of my stroke while on the balls of my feet.
  Reply
#2
Initial height adjustment is done with the heel of the foot on the pedal. The leg should be nearly straight but not stretched at this point.
If you do it without shoes first then add the thickness of the soles after.
This is only the start. You may find you want to alter the height slightly but only by a small amount.
Too low will hurt the knees and too high will play havoc with your hips.

Initial back/forward seat setting is so that the knee cap is over the pedal axle when the crank is pointing forward. (9 o' clock position).

You may find that you slide forward when exerting a lot of force on the pedals (climbing or racing).
Tilting the saddle fractionally may help but I tend to set mine horizontal.

You may also have to think about your bars affecting your riding position.
If the bars are too far away then this may give rise to you sliding forward.
Ride hard or ride home alone!
  Reply
#3
I did not think of the bars being a factor. Right now with seat position as it stands, my knee is just slightly ahead of the pedal axle, just a little. If I slide the seat back to correct this position then wont it make my sliding condition worse? Im using a Cloud 9 seat, reduced my male anatomy seat problems quite a bit, but have thought of a nose-less saddle. I spend most of the time sitting down in the saddle because I ride mainly bike trails so this is why seat comfort is very important. I am riding a 2009 Cannondale Comfort bike.


Thanks
  Reply
#4
Seat position is a personal thing.
No harm in having the saddle forward a bit. Apparently the seating position can effect the amount of power that can be put through the pedals but I doubt if that really matters. Comfort is generally more important.
Besides the bars setting there is also the possibility of the frame size not being quite right.
(ie too long a top tube). You could try a shorter or higher bar stem if possible, but then this may cost unless you can borrow one.

Do a bit of research, through "Google" and Sheldon Brown's site etc, about saddle positioning and see if there is anything there to help.
Ride hard or ride home alone!
  Reply
#5
You might actually try tilting the nose of the saddle up slightly. Depending on the seat's shape and your anatomy, perfectly horizontal is not always the best angle.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
11,465
08-29-2010, 09:48 PM
Last Post: Bill

Forum Jump:

[-]
10 Latest Posts
What is your dream cycling destination?
Yesterday 10:33 PM
Help! Trying to identify this bike
Yesterday 07:20 PM
Yet another bike ID thread (Pseudo-Batta...
11-28-2021 02:14 PM
New Memeber
11-27-2021 06:51 PM
Seeking recommendations
11-26-2021 03:25 PM
LYGIE AND ATALA WINTER PROJECTS
11-26-2021 12:54 AM
Budget Carbon Frames! ...who has bought...
11-26-2021 12:45 AM
Cycling motivation through the dark mont...
11-25-2021 06:28 PM
Where are you from and What is your favo...
11-25-2021 06:19 PM
Intro
11-25-2021 05:00 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. ReapThaWhirlwind
27 posts
no avatar 2. Jesper
15 posts
no avatar 3. jeffg
10 posts
no avatar 4. Papa Dom
6 posts
no avatar 5. steven chen
6 posts