Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

Best Black Friday E-Bike Deals 2024 | Up to $1,700 in Savings

New: Take Part in the November Giveaway: Starts November 18th


Gary Fisher / Bontrager crank problem
#21
Ye the UN54 BB is good and well priced, probably a job for the dealer as more special tools are needed.
Do not know what size you need perhaps RobAR can help, or Trevggb. You can email Fisher service.

AS per crankset, why do you want to replace it?? Couse if you do you should also replace the chain and the rear cluster.(not always, but by the book) IMO if it aint broken leave it alone.
Never Give Up!!!
  Reply
#22
That crank arm is pretty seriously flared. You might be able to keep it on with all the various locktight, lock washer tricks, but doubtful it will make a big difference. What really holds the crank arm on is that it is wedged tight. The bolt is there mainly to force it on, not as much to "hold" it. You should be able to buy a single left crank for pretty cheap. Might not match perfectly, but replacing the arm is the only thing that will really fix it.

It actually would not be unusual for your right crank to be perfectly fine. The left crank undergoes much higher load because it has to transmit all your force through the BB and over to the chain. On the right, a lot of the force goes directly to the chain before it ever reaches the crank arm BB joint. Also, this type of damage occurs from riding a loose crank arm. If an arm is tight, it won't develop this "over time". So if the right was still properly tight, good chance it has no damage. Can't be sure without inspection of course.
  Reply
#23
Hi,
I have a Gary Fisher bike and also I have problems with the left crank arm continually coming loose.
I just recently lost the crank bolt or nut (not too sure of the exact name of the part, excuse my lack of knowledge), however it is the same part as pictured by "tydy" in his photos above (pic three).
Does anybody know where I can get a replacement part?
Many Thanks
  Reply
#24
Any local bike shop should have those (and the hardware store, too). My LBS just gives such stuff to me for free, as I am a regular customer... (and because he's a nice guy and has a ton of those from old bikes)
  Reply
#25
Thanks Joe_W!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
31,908
07-19-2021, 12:00 AM
Last Post: rbx
 
57,927
07-14-2013, 05:27 PM
Last Post: Gixxer
 
5,744
09-14-2011, 08:45 PM
Last Post: BLTBYJ
 
10,438
08-28-2010, 03:49 AM
Last Post: trevgbb
 
9,316
08-24-2010, 04:46 AM
Last Post: trevgbb

Forum Jump:

[-]
10 Latest Posts
Second wheelset for ebike.
Today 01:41 AM
Moving in Style: Beyond Regular Transpor...
Yesterday 09:23 PM
Tire Sizing (Or How to Buy A Tire)
Yesterday 12:36 PM
The Roaming Radrunner Vlog 1 Why ride ...
Yesterday 09:17 AM
Recording Bike Rides
11-20-2024 01:37 AM
Ketone Ester $$$
11-19-2024 01:04 AM
Trek domane tyre
11-18-2024 01:58 PM
Old fossil buys Ebike
11-17-2024 06:39 AM
Bike bus
11-17-2024 12:14 AM
Humber "Eiffel Safety" bike 1800s
11-16-2024 03:05 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
22 posts
no avatar 2. enkei
19 posts
no avatar 3. GirishH
14 posts
no avatar 4. ReapThaWhirlwind
11 posts
no avatar 5. Flowrider
11 posts