Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Fulcrum 7 freehub bearings
#1
Hi,

The outside cartridge bearing in the freehub body of my Fulcrum 7 rear wheel has gone bad (the actual wheel bearings are OK as is the inner freehub bearing). The freehub body is the same in the Fulcrum 5 as the 7, according to the Fulcrum technical manual http://www.fulcrumwheels.com/repository/file/en/Spares2009-ROAD-16-12-08.pdf

Can these cartridge bearings be replaced? The tech manual lists the freehub body (including bearings, spring and pawls) as a single part R5-019. So they don't list the bearings separately. Plenty of places sell the freehub body for about $80 so I'm guessing a lot of them fail.

Fortunately I just bought a pair of Ksyrium SL's so I can ride those till I fix the Fulcrum!

Thanks,
Andy
  Reply
#2
(01-16-2011, 02:31 AM)andy_c Wrote:  Hi,

The outside cartridge bearing in the freehub body of my Fulcrum 7 rear wheel has gone bad (the actual wheel bearings are OK as is the inner freehub bearing). The freehub body is the same in the Fulcrum 5 as the 7, according to the Fulcrum technical manual http://www.fulcrumwheels.com/repository/file/en/Spares2009-ROAD-16-12-08.pdf

Can these cartridge bearings be replaced? The tech manual lists the freehub body (including bearings, spring and pawls) as a single part R5-019. So they don't list the bearings separately. Plenty of places sell the freehub body for about $80 so I'm guessing a lot of them fail.

Fortunately I just bought a pair of Ksyrium SL's so I can ride those till I fix the Fulcrum!

Thanks,
Andy
not easily - the tools to complete the job successfully will cost a LOT more than the $80-
Nigel
  Reply
#3
(01-19-2011, 02:55 AM)nfmisso Wrote:  
(01-16-2011, 02:31 AM)andy_c Wrote:  Hi,

The outside cartridge bearing in the freehub body of my Fulcrum 7 rear wheel has gone bad (the actual wheel bearings are OK as is the inner freehub bearing). The freehub body is the same in the Fulcrum 5 as the 7, according to the Fulcrum technical manual http://www.fulcrumwheels.com/repository/file/en/Spares2009-ROAD-16-12-08.pdf

Can these cartridge bearings be replaced? The tech manual lists the freehub body (including bearings, spring and pawls) as a single part R5-019. So they don't list the bearings separately. Plenty of places sell the freehub body for about $80 so I'm guessing a lot of them fail.

Fortunately I just bought a pair of Ksyrium SL's so I can ride those till I fix the Fulcrum!

Thanks,
Andy
not easily - the tools to complete the job successfully will cost a LOT more than the $80-

Hi Andy, Nigel,

Any luck fixing the bearings? I have the same problem and need to replace the freehub.

Nigel, any idea where I can find the tools (and which ones I need) to do this? Would be massively appreciated!

Thanks, Tim
  Reply
#4
(01-16-2011, 02:31 AM)andy_c Wrote:  Hi,

The outside cartridge bearing in the freehub body of my Fulcrum 7 rear wheel has gone bad (the actual wheel bearings are OK as is the inner freehub bearing). The freehub body is the same in the Fulcrum 5 as the 7, according to the Fulcrum technical manual http://www.fulcrumwheels.com/repository/file/en/Spares2009-ROAD-16-12-08.pdf

Can these cartridge bearings be replaced? The tech manual lists the freehub body (including bearings, spring and pawls) as a single part R5-019. So they don't list the bearings separately. Plenty of places sell the freehub body for about $80 so I'm guessing a lot of them fail.

Fortunately I just bought a pair of Ksyrium SL's so I can ride those till I fix the Fulcrum!

Thanks,
Andy

This task is easier than you would initially think. The hub contains two bearings. One of which is secured by a 'c' clip, the other more visible one can be easily removed. They are separated by a floating shim. I took the hub to a tool shop where they pushed out both bearings at once with a press for £4 however, because of the retaining c clip you are left with the outer case of the bearing. Remove the c clip using c clip pliers and then tap out the outer bearing case. Buy new bearings. Install. Job done
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,312
10-01-2022, 05:13 AM
Last Post: Jesper
 
4,075
02-07-2022, 02:46 PM
Last Post: Jesper
 
4,054
08-30-2021, 03:46 AM
Last Post: Poissonj1
 
12,528
07-31-2015, 08:34 PM
Last Post: Painkiller
 
21,574
05-26-2015, 02:31 PM
Last Post: eric1023
 
17,252
01-27-2015, 03:36 PM
Last Post: nfmisso

Forum Jump:

[-]
10 Latest Posts
2011 GT Tachyon upgrade/mod
Today 08:45 AM
Doctors are Prescribing Cycling
Yesterday 09:50 PM
What was your first bicycle?
Yesterday 09:17 PM
New Rider Here — Momo + Viribus = Ready ...
Yesterday 09:15 PM
The great thing about trikes
Yesterday 03:47 AM
New member old rider
04-22-2025 06:32 PM
Tubeless vs. tubes: What are the pros an...
04-22-2025 06:30 PM
Shoes for ingrown toenail
04-22-2025 05:13 PM
Good morning form Alberta CA
04-22-2025 12:24 PM
Let me introduce myself
04-22-2025 09:01 AM

[-]
Top 5 Posters This Month
no avatar 1. GirishH
24 posts
no avatar 2. SPINMAN
14 posts
no avatar 3. Flowrider
13 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. enkei
11 posts