Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for a brand new 26" Thruster® Street Style BMX Cruiser Bicycle


Determining headset, head tube and steerer diameter measurements
#1
I've acquired a very large and possibly non standard old steel frame I'm going to use to build up an expedition bike. This will be my first bicycle build so I'll be learning along the way.

I'm hoping to build it from bits around the place, on the cheap, wherever possible (mates dead bikes, local 2nd hand bike shop parts pile etc) Due to the size of the head tube (213 mm length) I can't just throw on any fork so it looks like I'll be ordering one off the internet.

There are a few cheap forks with 250mm+ steerers around that are 1 1/8. My question is, using the internal head tube diameter (30mm) how can I determine what the diameter of the steerer should be? And consequently the headset?

I'm pretty new to this game and I appreciate any help I can get on this.

Cheers,

Jack
  Reply
#2
Jack, see if http://www.sheldonbrown.com/cribsheet-headsets.html is the info that you're looking for. I bet it is!
By the way, browse that site for hours. Tons of info there!

Rob
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#3
You can use that inside diameter from the headtube and find a headset that fits. Threaded Headset:Make sure the new headset thread matches the new fork thread. Threadless: make sure the diameter of the headset and fork diameter are properly sized. Determine your fork length and headset stack height. Cut the fork if needed. Set the crown race on the fork. Careful not to damage the race. Threadless: set a star nut in the fork column. A little bit of math to do this but measure twice, cut once. Check out parktool.com for another resource
GO RIDE...
  Reply
#4
Quote:Threadless: set a star nut in the fork column. A little bit of math to do this but measure twice, cut once. Check out parktool.com for another resource

Or whack a Headlock, Hope Head Doctor, or similar in there. It's easier than a star nut and can be removed fairly easily as well. Downside is it's a bit more expensive. The Hope is a better one, but I have no idea if you can get Hope out in Australia

http://www.chainreactioncycles.com/Models.aspx?ModelID=911

http://www.chainreactioncycles.com/Models.aspx?ModelID=17766
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Pain from bike saddle.
Today 07:27 AM
26" Thruster® Street Style BMX | July 20...
Today 01:53 AM
Pinging noise fixed
Yesterday 09:02 PM
COLSON TANDEM BIKE REAR STEERING
Yesterday 08:39 PM
Need help finding a new rear derailleur
Yesterday 06:56 PM
Work Table For Wheels
Yesterday 02:05 PM
road bike purchase help please
Yesterday 12:27 PM
Saddle Height
Yesterday 09:50 AM
What would be a fair price for this?
Yesterday 02:54 AM
Any info in Empire Bicycles?
07-01-2020 07:28 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
59 posts
no avatar 2. Painkiller
18 posts
no avatar 3. CharleyFarley
14 posts
no avatar 4. Joe_W
11 posts
no avatar 5. Papa Dom
9 posts