Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Is this "Pitted"?
#1
[attachment=746]

Hi All.

Have just removed a bottom bracket from an old frame I picked up cheap. Has loose ball bearings and very old and grungy grease! Have removed all the parts and was wondering if I can re-use the axle-spindle, or is it "pitted" and useless?

If so, can I buy a replacement axle, or do I have to buy the whole unit. BB is threaded and has 2 different lock rings on each side.

Thanks in advance for any help or suggestions offered.
  Reply
#2
Yes, replace the lot, they are standard parts and should be off the shelf at any reasonable lbs, take the old parts with you as there are many different axle lengths, check if one side of the axle is longer than the other, this usually goes to the cw side. Cost about £15.
Some cup sets are splined and you need a special tool, about £10.
  Reply
#3
OK - thanks for the reply.

Is it possible to replace this "Adjustable BB" with a Cartridge BB??, if so what do I need to know in terms of measurements and spindle length before doing so?

The frame I'm working on is just an old steel frame and fork. Obviously the BB is shot, and the headset is a mess also.
I'd like to build the frame up as a single speed commuter......so will the BB I choose dictate the type to cranks I can fit, or limit the options? - If so can anyone point me in the right direction for BB selection that will give me a large number of crank options.

Thanks in advance for any help or suggestion offered.
  Reply
#4
(04-24-2010, 02:25 PM)JackRabbitSlims Wrote:  OK - thanks for the reply.

Is it possible to replace this "Adjustable BB" with a Cartridge BB??, if so what do I need to know in terms of measurements and spindle length before doing so?

The frame I'm working on is just an old steel frame and fork. Obviously the BB is shot, and the headset is a mess also.
I'd like to build the frame up as a single speed commuter......so will the BB I choose dictate the type to cranks I can fit, or limit the options? - If so can anyone point me in the right direction for BB selection that will give me a large number of crank options.

Thanks in advance for any help or suggestion offered.

Yes, you can fit a sealed unit, you need to know your bb shell length, 68, 70, or 73mm. and you axle overall length, again your lbs should have suitable parts in stock, but is it worth spending money on an old bike, the wheels are probably shot as well as the other bearings, and setting it up for single speed running may may not be as easy as it looks, you may have chain line problems, making it difficult to keep your chain on.
I suggest you take the bike into your lbs, tell them what you want to do and ask their advice.
  Reply


Forum Jump:

[-]
10 Latest Posts
Expensive bikes with crappy wheels
Today 10:15 AM
Santini fluted frame
Today 07:44 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts