Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


How do you remove a freewheel when the tool does not work? [Solved]
#1
I have these Chinese freewheels. On the inside are ridges which are supposed to be there so you can use the tool to remove it. With these freewheels, the ridges are very low. I have a tool, also made in China, and the ridges on the tool are also very low. So when trying to use the tool to remove the freewheel, it does not grip properly, and it can't be used to remove the freewheel. The metal on the tool is also very soft, so when it slips, the tool is destroyed.

Does anyone have any good ideas on how to remove a freewheel when the tool does not work?

Somebody is going to say, buy different freewheels, and a better tool. Even if I did, I have these on two bikes already, and at some time in the future, they will need to be removed.
  Reply
#2
I'm guessing that you mean a single speed freewheel yes?

These are certainly troublesome to remove.

The trick to removing these is to use the lock nut to anchor down the tool to the freewheel for removal.

Put the tool onto the freewheel into the spots, now screw the nut down until it's very close and firm, but try to give yourself a little room for when you turn the freewheel out so that the tool and the bolt doesn't get seized together.
  Reply
#3
(06-14-2022, 07:03 PM)ReapThaWhirlwind Wrote:  I'm guessing that you mean a single speed freewheel yes?

These are certainly troublesome to remove.

The trick to removing these is to use the lock nut to anchor down the tool to the freewheel for removal.

Put the tool onto the freewheel into the spots, now screw the nut down until it's very close and firm, but try to give yourself a little room for when you turn the freewheel out so that the tool and the bolt doesn't get seized together.

You can also use a narrow drill bit to drill a couple of millimetres in to the spots to make them a bit deeper so you can get more grip on them .
  Reply
#4
I now have a solution for this. I made a tool using a car wheel nut. This works well.

https://forums.bikeride.com/thread-8029.html
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts