Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


BB90 GXP Adapter
#1
Has anybody else ever worked with this? I have installed the bearings which went into the frame by hand and are straight, but whenever I get to tightening the cranks it seems to bind up and there is no way that I will be able to get to the recommended torque level of 48nm. The cranks have the correct order of wavy washer then seal on the drive side and just the seal on the non drive side. The amount of torque I can get it to is about 15nm and there is no play at all.
  Reply
#2
[quote='fishfighter' pid='34467' dateline='1471042732']
Has anybody else ever worked with this? I have installed the bearings which went into the frame by hand and are straight, but whenever I get to tightening the cranks it seems to bind up and there is no way that I will be able to get to the recommended torque level of 48nm. The cranks have the correct order of wavy washer then seal on the drive side and just the seal on the non drive side. The amount of torque I can get it to is about 15nm and there is no play at all.
[/quote...

>>>>>>>>>>>>>>>>>

That's a lot of torque 65 ft lbs. Tighten till no play and ride for a while that see if you can tighten a bit more, do not force. You sure the bearings are facing the right way toward the cup?
Never Give Up!!!
  Reply
#3
The bearings are in correctly per the instructions, it is just weird that I am not able to tighten it up to what is prescribed. The seals will drag a bit as well but should not be causing as much resistance as I am experiencing. 48nm = 35 ft lbs
  Reply
#4
(08-13-2016, 11:10 AM)fishfighter Wrote:  The bearings are in correctly per the instructions, it is just weird that I am not able to tighten it up to what is prescribed. The seals will drag a bit as well but should not be causing as much resistance as I am experiencing. 48nm = 35 ft lbs

OOps read the chart backwards. Used to ft lbs.

http://www.thetoolhut.com/Torque-Conversion-English-Metric.html
Never Give Up!!!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
RECOMMENDATION
Today 04:24 PM
New Member
Today 03:31 PM
2011 GT Tachyon upgrade/mod
Today 08:45 AM
Doctors are Prescribing Cycling
Yesterday 09:50 PM
What was your first bicycle?
Yesterday 09:17 PM
New Rider Here — Momo + Viribus = Ready ...
Yesterday 09:15 PM
The great thing about trikes
Yesterday 03:47 AM
New member old rider
04-22-2025 06:32 PM
Tubeless vs. tubes: What are the pros an...
04-22-2025 06:30 PM
Shoes for ingrown toenail
04-22-2025 05:13 PM

[-]
Top 5 Posters This Month
no avatar 1. GirishH
24 posts
no avatar 2. SPINMAN
14 posts
no avatar 3. Flowrider
13 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. enkei
11 posts