Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Sturmey Archer AW bearing cone spacing
#1
Hi, I have have just restored a very old (circa 1968) raleigh bike. It has an AW 3 speed hub. In my hast to rejuvenate the rear hub I have removed both bearing cones from the rear axle. It appears that the position of the cones on the axle is critical to proper gear operation. How do you reset the correct bearing position? ie If I had the replace the rear axle, how would I reset the correct cone position?

Cheers Aljac
  Reply
#2
Hi Aljac. start here - http://sheldonbrown.com/sturmey-archer.html - and follow the links!
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#3
Also if you use the keywords "sturmey archer" in the upper right there should be a couple of posts with links on this site. Wink
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#4
(12-18-2010, 04:19 PM)aljac Wrote:  Hi, I have have just restored a very old (circa 1968) raleigh bike. It has an AW 3 speed hub. In my hast to rejuvenate the rear hub I have removed both bearing cones from the rear axle. It appears that the position of the cones on the axle is critical to proper gear operation. How do you reset the correct bearing position? ie If I had the replace the rear axle, how would I reset the correct cone position?

Cheers Aljac

The critical cone is the right hand one (sprocket side). Usually set at the factory and left alone for 50 years or so.
To set it, leave the left hand cone loose or off, then put the lh flatted axle in a vice. Then hand-tighten the rh cone (no wrenches!). Once it has bottomed, back it off half a turn (but no more than 5/8), then drop the lock washer over it and tighten the jam nut, while holding the rh cone steady (15 mm cone spanners). That's it.
Then install lh cone and tighten til there is only a little play in the wheel, lock in place. This is the only one you should mess with as the hub bearings wear with use.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
Giant reporting profits are 60% down
Today 10:50 AM
Thoughts on tariff effects on the cyclin...
Today 10:30 AM
braking by reversing the pedals
Today 09:00 AM
Post-Ride Nutrition
04-03-2025 02:06 AM
🚴‍♂️ Saddle Up for the Belgian Waffle Ri...
04-03-2025 02:03 AM
Pre Ride Food Intake
04-03-2025 12:14 AM
SAVA Explorer 6061?
04-02-2025 03:31 PM
Zwift v Spin v Wahoo
04-01-2025 05:59 PM
Have you Ever Tried an Electric Bike?
04-01-2025 05:07 PM
Good Morning from SW Ohio
04-01-2025 07:32 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. Flowrider
18 posts
no avatar 3. Jake1
14 posts
no avatar 4. meamoantonio
12 posts
no avatar 5. SPINMAN
9 posts