Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the new April's Giveaway for a Chance to Win the Euybike S4 Pro Max ebike worth $1299


Shifter repair
#1
Sad 
So my front derailleur shifter is not going in 3 Everytime I push it for a slight moment the chain stands on the 3rd gear.And when I stop pushing it goes back to 2.The last pic is when I pushed the shifter to 3.And the shifter is very hard to push


Attached Files Image(s)
           
  Reply
#2
One of two things are wrong.

1.) You have too much tension on the cable. To check the cable for stretch wear and properly evaluate the front derailleur mechanism, you need to shift it down into the lowest gear/smallest cog. Unfasten the cable, pull it tight with your hand to remove all possible slack, and while doing that re-fasten the cable to the front derailleur bolt. If you cannot ascend the gears cleanly, this will tell you that maybe the cable has stretched too much and needs to be replaced, or the spring in the front derailleur has worn out its life and the entire unit needs to be replaced.

2.) You have too much leverage applied by the high limit screw. Peek inside the derailleur and check the high limit screws descent. Unwind it a touch, and then try again. Do not force the gear because you can break the shifter. If it does not cleanly ascend, unwind it a little more and repeat to troubleshoot. Another method involves unwinding it all the way, shifting into the 3rd cog, then slowly screwing it back in until you put just a little torque pressure on the lever hammer with the screw. Shift it back down and up again to check it's working properly.

If you're getting chain rub, then you need to check the alignment of the derailleur on your seat tube. The outer line of the cage needs to be running linear to the chainring and should be positioned about 3mm vertical (above) and lateral (to the side).

A third possible element is you broke your shifter mechanism and it needs to be replaced. You can unlink the cable take off the cover and check inside. If it doesn't click all the way from freestance, then it means the mechanism is broken.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,586
08-02-2021, 07:23 AM
Last Post: Blank.Toogii
 
25,383
02-12-2010, 03:40 PM
Last Post: Voyage

Forum Jump:

[-]
10 Latest Posts
Unlocking speed on my e-bike.
Yesterday 01:04 PM
MTB handlebar width
Yesterday 06:25 AM
What is your favorite MTB trail/route in...
Yesterday 06:16 AM
What are the best cost effective ways to...
Yesterday 06:07 AM
Bridgestone Blouson bike.
04-26-2025 07:57 PM
Thoughts on paceline riding
04-26-2025 05:51 PM
2011 GT Tachyon upgrade/mod
04-26-2025 05:04 PM
RECOMMENDATION
04-26-2025 05:01 PM
Injury Recovery
04-26-2025 04:59 PM
1987 Tommaso Alloy lugged frame
04-26-2025 04:58 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. GirishH
22 posts
no avatar 2. enkei
16 posts
no avatar 3. Flowrider
15 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. SPINMAN
12 posts