Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Mountain Bike Grip shift is stuck in one gear
#1
Thumbs Down 
So I’ve made a dumb decision and drove my grip shift 18 speed mountain bike in water that was over my handlebars and am now deeply regretting it. After going through the water the bike still worked perfect. It wasn’t until about 2 days later when i went to go ride it and noticed that it was stuck in gear 5. So i tried to do some research but couldn’t figure it out. I really need to fix the problem, Any explanations, help, and solutions would be greatly appreciated!
  Reply
#2
Try to peel back the covering and spray some lubricant inside.

WD-40 or Triflow or even PB Blaster
  Reply
#3
(06-12-2021, 11:51 AM)ReapThaWhirlwind Wrote:  Try to peel back the covering and spray some lubricant inside.

WD-40 or Triflow or even PB Blaster

ok will try that. Thanks!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
17,978
03-21-2010, 05:05 AM
Last Post: MrTrickles

Forum Jump:

[-]
10 Latest Posts
Your next ebike could have two motors, b...
Today 07:09 PM
How Bad Are E-bikes By You?
Today 07:01 PM
Shortness of breath.
Today 06:56 PM
Are you mainly into Mountain Biking, Roa...
Today 06:54 PM
Hatch Chiles Rule!
Today 05:29 PM
Are 26" really dying out?
11-11-2026 11:02 AM
Wanted | Magura Louse or Julie rear
11-11-2026 04:03 AM
Should eBikers have to get an eBike lice...
11-09-2026 05:21 AM
Hello All
11-06-2026 09:03 AM
I don't usually wear a bike helmet. Does...
11-06-2026 02:48 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
22 posts
no avatar 2. ReapThaWhirlwind
11 posts
no avatar 3. meamoantonio
11 posts
no avatar 4. GirishH
8 posts
no avatar 5. Sidewinder
8 posts