Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take part in the July Giveaway for a brand new 26" Thruster® Street Style BMX Cruiser Bicycle

New product launch: WIN an innovative aeroe Spider Rear Rack


Presta tubes
#1
Hi,
When I was younger, I only had a bike till I was25. I am trying to get back into biking again. I bought a vilano performance hybrid roadbike and it came with 700 x 28c tires with presta valves. Now, its been a long time, but what was wrong with schreider valves ? Anyway, I know tubes loose air pressure over time, but I only rode the bike In the parking lot once to see how the adjustments were, one week later, I went to ride the bike, and both tires were completely empty, I pumped them back up to 85 psi, and a week later they were completely empty, I tightened the nuts after and replaced the caps, I expected to lose some pressure, but not all the pressure. Am I doing something wrong? Thanks for any help.
  Reply
#2
I am not a fan of Presta valves,but they are used on narrow rims where a large hole used for Schrader valve would weaken the rim.

Sounds like you are not tightening the lock nut, check info here. Welcome back to riding.........


http://sheldonbrown.com/gloss_p.html#presta
Never Give Up!!!
  Reply
#3
(04-05-2014, 03:18 AM)GeorgeET Wrote:  I am not a fan of Presta valves,but they are used on narrow rims where a large hole used for Schrader valve would weaken the rim.

Sounds like you are not tightening the lock nut, check info here. Welcome back to riding.........


http://sheldonbrown.com/gloss_p.html#presta

Ok, I did retighened the nuts, maybe not enough, how tight is tight? Also how tight for the retainer nut? Thanks In advance.
  Reply
#4
You don't need to make either the nut on the tip of the valve or the retaining nut very tight. That won't make it hold air better and too tight could damaged the valve or tube. I suspect that if the tires are losing air that fast, they are probably just cheapo tubes.

Once you get used to them, prestas are a bit easier to pump up. But unless you always have a hand pump with you, I'd recommend picking up a presta adapter ($1-$2) to keep on the bike. That way you can pump up at a gas station if needed.
  Reply
#5
(04-05-2014, 10:26 AM)DaveM Wrote:  You don't need to make either the nut on the tip of the valve or the retaining nut very tight. That won't make it hold air better and too tight could damaged the valve or tube. I suspect that if the tires are losing air that fast, they are probably just cheapo tubes.

Once you get used to them, prestas are a bit easier to pump up. But unless you always have a hand pump with you, I'd recommend picking up a presta adapter ($1-$2) to keep on the bike. That way you can pump up at a gas station if needed.


Thanks, One other question, which is better, air or CO2? I heard you lose pressure more quickly with CO2.
  Reply
#6
You'll lose pressure faster with CO2. And those pressurized CO2 inflator things are a pain in the @ss.
  Reply
#7
(04-05-2014, 11:12 AM)DaveM Wrote:  You'll lose pressure faster with CO2. And those pressurized CO2 inflator things are a pain in the @ss.

Thanks
  Reply
#8
With tires going completely flat in a week you have a air leak, either the valve, or the tube was pinched on installation and you have a slow leak. Screw down the lock screw and put a bit of spit or soapy water on the valve and see if it bubbles. If that does not leak pull out the tubes fill them with air and immerse in a water through , put some pressure on them with your hands and see if you spot leaks. Replacements are not expensive. I suspect valve issues. Finger tight is adequate BTW...

Like I said I am not a fan of these valves as a former Mountain Bike Unit rider I always carry supplies to help other bikers. I came upon a rider with a Presta valve and we could not fill the tube, another time I came across a Schrader valve that did not fit my pump.

As Dave said some Cheap stuff out there.

I added a Presta to Shrader adopter to my tool kit. Most bike pumps have reversible nuzzles.
Never Give Up!!!
  Reply
#9
Ok, thanks. I will check that. As this is a new bike, tubes and tires came with it, so I dont know what is in there and I was thinking they would be using quality parts from the manufacture. First time with presta valves, so I thought I might be doing something wrong.
  Reply
#10
I ride only Sclaverand valves (I guess Presta to the Francophobes) and as George commented (but worth stressing!) a likely mistake is that the valve core is not screwed in properly (apart from installation errors of tube and tyre). Plus tubes all lose air - the light weight butyl ones more than heavy duty butyl tubes, and latex tubes even more. On a road bike with latex tubes you lose 1 bar per day. It is good practice to check air pressure often, you'll find out how often you will need to check (daily for my road bike and cyclocross, weekly to bi-weekly for the tourer).
The caps and the valve nuts have nothing to do with the problem, I don't even have them on my road bike (the latex tubes (Michelin) do not have outside threads on the valves = no valve nut). In the rear I installed an adapter so that I have one in case I need air... (like many suggested).
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
9,172
12-25-2015, 02:33 PM
Last Post: bobtravers
 
5,802
11-17-2014, 11:27 AM
Last Post: cny-man
 
2,417
10-19-2014, 07:44 PM
Last Post: nfmisso
 
11,791
04-15-2014, 10:56 AM
Last Post: nfmisso
 
7,536
08-21-2013, 06:53 PM
Last Post: Texcards
 
6,471
11-26-2011, 02:15 AM
Last Post: froze

Forum Jump:

[-]
10 Latest Posts
FD cable pull on opposite side of frame
Today 01:00 AM
26" Thruster® Street Style BMX | July 20...
Yesterday 10:58 PM
Post a photo for aeroe Spider Rear Rack
Yesterday 10:47 PM
Creaky crank with play and loosening
Yesterday 06:36 PM
60s Viner Repainted..?
Yesterday 06:23 PM
budget speedometer
Yesterday 10:44 AM
2020 road cycling season
Yesterday 08:53 AM
Pinging noise fixed
Yesterday 08:08 AM
Need advice on Bike Rack
Yesterday 02:07 AM
RE: Merida Matts 6.5 Bicycle | June 2020...
07-07-2020 11:25 PM

[-]
Top 5 Posters This Month
no avatar 1. Jesper
69 posts
no avatar 2. CharleyFarley
19 posts
no avatar 3. Painkiller
15 posts
no avatar 4. Papa Dom
10 posts
no avatar 5. G_M
8 posts