Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.


Hub Interchangebility
#1
Want to upgrade the hubs on my 2009 Cannondale Comfort. 26x2.0 wheels.
I have V-brake hubs now. Only problem I see is all the new hubs I looked at are disc brake style. Can I still use the disc brake style hubs with my V-brake setup? The current hubs are Cannondale Earth hubs. I am looking for strength and durability in the new hubs. Love to have some Phil Wood hubs but they are too expensive (but they are made in America).
  Reply
#2
Yes you can, you'll just have unused disc rotor tabs, assuming you're not putting disc brakes on. Just make sure you put the right data into a spoke calculator to get the length right. However bear in mind it is often cheaper just to buy a new complete wheel (wasteful and depressing really)

As for hubs, it doesn't make a huge amount of difference how strong the hub shell is. I ride a lot of Downhill MTB and hub failure is not that common, and people use everything from cheap and cheerful to Chris King. What you want instead is a good bearing system that lasts, ideally cartridge as they're replaceable and prolong the life of your hub. I don't know much about roadie hubs, though in my experience the Mavic MTB ones aren't bad, and Richey hubs have a good sealed bearing system. The preferred hub choice over here is Hope, but I don't think you can buy them outside the UK.
  Reply
#3
(05-08-2011, 10:32 AM)rprough Wrote:  Want to upgrade the hubs ......
Why?

What do you expect from the replacement hubs that a quick clean and rebuild to your present hubs will accomplish?
Nigel
  Reply
#4
(05-08-2011, 01:27 PM)nfmisso Wrote:  
(05-08-2011, 10:32 AM)rprough Wrote:  Want to upgrade the hubs ......
Why?

What do you expect from the replacement hubs that a quick clean and rebuild to your present hubs will accomplish?

I am looking for strength and durability in the new hubs. Probably durability as most important. If the current hubs will be ok then I will just rebuild them.
  Reply
#5
There is not much difference in hub durability between hubs.

Rebuild what you got, and spend your money on something else.
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
25,655
12-12-2011, 03:41 AM
Last Post: Joe_W

Forum Jump:

[-]
10 Latest Posts
New rider
Yesterday 11:27 PM
Mountain Biking with or with out sunglas...
Yesterday 11:23 PM
How Bad Are E-bikes By You?
Yesterday 11:12 PM
Catastrophic bicycle failures
Yesterday 11:08 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 05:40 PM
I don't usually wear a bike helmet. Does...
Yesterday 03:51 PM
Impromptu bikepacking/touring dilemma..
10-01-2026 08:38 PM
Bmx with 26 inch wheels
10-01-2026 05:50 PM
Gila Monster Gran Fondo
10-01-2026 05:41 PM
Hatch Chiles Rule!
10-01-2026 05:10 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Flowrider
25 posts
no avatar 2. Sidewinder
23 posts
no avatar 3. GirishH
18 posts
no avatar 4. SPINMAN
12 posts
no avatar 5. meamoantonio
11 posts