Double bent seat stay

dweenk · 03-23-2013, 02:45 PM

I have a Schwinn Traveler with a seat stay that has two bends. In addition, the entire rear triangle is shifted to the drive side by about .5 inches. Is this repairable? There are no cracks or dimples in any of the tubes, and this is one of the "good Travelers" (CroMo + forged dropouts & hanger). The paint sucks however - looks like it may have been in a low temp smoky fire. Any hope here?

dweenk · 03-23-2013, 02:59 PM

I posted a photo on this, but I do not see it. What did I do wrong?

Painkiller · 03-23-2013, 06:53 PM

you missed a step, you have pick the file then over on the right you have to add it to the post and pic another and do that for every pic then hit post reply

dweenk · 03-24-2013, 12:45 PM

[attachment=4026]Thanks Painkiller. I noticed that I had an error message that the file is too large. here goes again.

10 Latest Posts
New rider Yesterday 11:27 PM
Mountain Biking with or with out sunglas... Yesterday 11:23 PM
How Bad Are E-bikes By You? Yesterday 11:12 PM
Catastrophic bicycle failures Yesterday 11:08 PM
2007 Trek Pilot S.P.A. 5.2 Yesterday 05:40 PM
I don't usually wear a bike helmet. Does... Yesterday 03:51 PM
Impromptu bikepacking/touring dilemma.. 10-01-2026 08:38 PM
Bmx with 26 inch wheels 10-01-2026 05:50 PM
Gila Monster Gran Fondo 10-01-2026 05:41 PM
Hatch Chiles Rule! 10-01-2026 05:10 PM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom