Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


26" to 700C conversion.
#1
Hi,

I am converting a MTB with 26" wheels to 700c. I live in the UK and do not go off road, but would like a bike to ride on canal tow paths (some of which can be a "little rough". All is OK, have swooped out the front forks to a rigid type (with the correct bosses for mounting a V brake onto a 700c wheel) - but....i would prefer too fit V brakes on the rear, and the bosses are in the wrong place. I know that Mavic used to do a converter, but cannot find one anywhere. Has anyone else done this? and what did you do?

Many thanks in advance.

Kevan
  Reply
#2
Hi Kevan;

Take a look at these:
http://www.ratrodbikes.com/forum/index.php?threads/modern-v-brakes-on-a-vintage-frame.33168/#post-323461
https://www.biketrailershop.com/xtracycle-26-to-700c-brake-post-conversion-adapter-p-1600.html
https://leagueofbikepolo.com/forum/general/2012/10/19/diy-v-brake-adapter-for-center-mount-frames

I am using these on a 559 to 590 conversion:
http://elevnracing.com/products/brake-adaptators/
they only provide 16mm, not enough for 559 to 622; which is 31.5mm radial difference.

I would probably put a caliper brake on instead, it would be easier.
Nigel
  Reply
#3
Hi Nigel,

Many thanks for the great information. Will probably go with calipers as you suggested - will still need standard drop on front and deeper drop on rear.

Although... have found the Freeradical adapter plate from a UK supplier (http://practicalcycles.com/products/188742--xtracycle-700c-v-brake-adaptor.aspx) even if they are taking the piss when it comes to price.

I have a spare deep drop Miche caliper, think I will try that first then make a final decision.

Again, many thanks for the quick and useful reply.

Cheers,

Kevan
  Reply
#4
Hi Kevan;

To be clearer than I was, I would stick with the V-brake on the front, and caliper on the back. You will need appropriate levers for each end. I have done a couple bikes with mismatched brakes, work great. One was the Black GT, it has a V-brake on the front and a U-brake on the back. OEM spec was a cantilever on the front and a U-brake on the back.
Nigel
  Reply
#5
Cheers Nigel. Good advice, Many thanks

Kevan
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts