Carbon fiber stem

bobkdenver · 05-06-2014, 06:31 PM

The Newton setting is printed on the stem. Would it be the same torque for the top bolt and the two sides?

Painkiller · 05-06-2014, 08:28 PM

(05-06-2014, 06:31 PM)bobkdenver Wrote: The Newton setting is printed on the stem. Would it be the same torque for the top bolt and the two sides?

what do you mean by top bolt. If you are referring to the top cap on the fork tube then the answer is no. The top one is used to preload the bearings so that the movement is smooth with no rocking slop and free moving.

bobkdenver · 05-07-2014, 08:25 AM

Is there a recommended torque setting for the cap, or is it just "finger tight"?

DaveM · 05-07-2014, 11:36 AM

(05-07-2014, 08:25 AM)bobkdenver Wrote: Is there a recommended torque setting for the cap, or is it just "finger tight"?

The bolt in the top cap is used to adjust the bearings. The correct torque is that which is as loose as possible, but takes all the play out of the headset bearings. Google 'how to adjust threadless headset' and you'll see what I mean.

10 Latest Posts
Christmas presents for cycling Yesterday 10:23 PM
Lectric One 04-17-2024 09:58 PM
Cycling in the Wind 04-17-2024 03:45 PM
Do you have a four foot rule? 04-17-2024 12:49 PM
What New Year's Cycling Resolutions Do Y... 04-17-2024 10:58 AM
E-Bike with my camera 04-16-2024 09:47 PM
Tyres keep popping off wheels... 04-16-2024 04:45 PM
Saronni Colnago Critrium Frame set 04-16-2024 03:26 PM
Rear hub issue 04-16-2024 04:18 AM
Vintage (and mint) Torelli...unknown yea... 04-16-2024 12:43 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom