Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Giveaway coming soon


Hedseat - Headtube 44mm help...
#1
Ive run into a problem and would like some assistance from others who may know, before I buy parts.

I have a Walmart 29" GX7 beach cruiser chrome, 7 speed. Someone replaced the forks and the headset, but not correctly. I need to fix this, but im unsure of what to buy.

you can see in the pictures, the bicycles headtube is flared on top and also on the bottom. the inside diameter of the flared space of the headtube is 1 3/4 inch (44mm) and the forks are 1 1/8 SR suntour LO 29"




BTW... Taking it to a shop would be to costly for me.

[img][Image: 20150610_181427_zpsudra3mjc.jpg][/img][img][Image: 20150610_113457_zpsvhakgxkg.jpg][/img]
  Reply
#2
Something about the headtube looks like it has been cracked and repaired. Could be just the pics.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
It does look that way, and its a possibility. Interesting what the naked eye cannot pick up so easily, and I have 20/20. This was taken with a 16MP camera, lol.

Im still stumped regarding the type of headset I need to buy though... Anyone out there who can help??

I would be very grateful :-)
  Reply
#4
one like this should work, add spacers that you need
http://www.cambriabike.com/Rs11-Semi-Integrated-11-8-Headset.asp?utm_source=google&utm_medium=cse&utm_term=100140741&gclid=CJ3rkZbRiMYCFVM1aQoddW4A_w
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
Thanks! I appreciate your help. Ive been reading site after site to learn the terminology of headsets, thinking this will help me understand what I need to buy, but haven't been able to find a few things. maybe you can help.

on the Headset pictured below, the left side arrow points to one outer portion and the right arrow to another. What is the term for each?

my inner diameter is 44mm, so, im assuming the arrow on the right is the portion that would be 44mm in size, is that correct?

thanks

[Image: New%20Bitmap%20Image_zpsdtsr4ms2.jpg]
  Reply
#6
Your left and right arrow's are pointing at one piece not two. the left is just a flange, the right is the outside dia. of the 44mm as you thought. it should fit snug into your frame. I call them cups, upper and lower.
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#7
I should have said two spots on one piece. Thanks, that's what I needed to know.

Thanks again, Ami.
  Reply


Forum Jump:

[-]
10 Latest Posts
Tyres keep popping off wheels...
Today 04:45 PM
Saronni Colnago Critrium Frame set
Today 03:26 PM
Rear hub issue
Today 04:18 AM
Vintage (and mint) Torelli...unknown yea...
Today 12:43 AM
Do you have a four foot rule?
Yesterday 11:19 PM
Cycling in the Wind
Yesterday 10:52 PM
Decision-Decisions
Yesterday 06:21 PM
Cannondale Transport Fork Mount Rack for...
Yesterday 06:01 PM
What tools have you bought recently?
Yesterday 05:37 PM
What New Year's Cycling Resolutions Do Y...
Yesterday 03:20 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
26 posts
no avatar 2. enkei
25 posts
no avatar 3. Frankly
23 posts
no avatar 4. Painkiller
16 posts
no avatar 5. meamoantonio
12 posts